Bellhop Bollard

Bellhop Bollard H 380

Designed by Edward Barber and Jay Osgerby

Originally conceived as a table lamp for the London Design Museum restaurant, Bellhop moves outdoors. Reminiscent of a hatted hotel porter, Edward Barber & Jay Osgerby’s contemporary design offers diffused lighting which enriches landscapes and architecture.

Bellhop utilizes the latest generation LED technology installed around the lamp head, protected by an opal optic diffuser, allowing a smooth and homogeneous light to radiate all around the pole.

Mounting
Ground
Lamp
LED
Length
380mm / 15"
Beam Angle
85°
Wattage
8W
Lumen Output
551 Im to 751 Im
Color Temperature
2700K, 3000K, 4000K
CRI
80
Finishes
White
Grey
Anthracite
Stainless Steel
Black
Deep Brown
Forest Green
IP Rating
IP65, Outdoor Wet Location
Certifications
cULus
Power Supply

Integral Non-Dimming Driver, 120V

Notes

Recommended connections for in-ground installations with a 2-way terminal block 4- pole IP68 water stop on 24V side. Order separately.

Painted versions are an exterior rated epoxy polyester powder coat finish for superior strength, heat and UV resistance.

During installation and maintenance avoid scratching or damaging the finish as it may result in premature corrosion of metal surfaces. Avoid cleaning fixtures with corrosive chemicals as it may result in voiding the warranty.

LED fixtures are highly susceptible to failure due to electrical effects from poor connections, and electrical short circuits. These are frequently caused by (a) over- voltage from primary voltage sources, (b) electrostatic discharge from the exterior environment. Ensure that all outdoor fixtures are installed on GFI circuits as required by code, and use proper surge protecting devices to avoid irreversible damages to electrical components.

Images