Klein Pro

Klein Pro H600

Designed by Flos Outdoor

Clean lines, clear intersections, and refined simplicity make Klein PRO barely noticeable in its surroundings offering at the same time perfect and precise functionality. The family has been reengineering and continues to amaze with its state-of-the-art LED light source. The integral imperceptible LED light source stands out when combined with anodized screen pieces to improve the general light.

Mounting
Ground
Lamp
LED
Length
23.6"
Beam Angle
45°
Wattage
11W
Lumen Output
294lm, 304lm, 325lm
Color Temperature
2700K, 3000K, 4000K
CRI
80
Finishes
White
Grey
Anthracite
Black
Forest Green
Deep Brown
Anodized Natural
Anodized Black
Aiming
Fixed
IP Rating
IP66, Outdoor Wet Location
Certifications
cULus
Power Supply

LED power supply source for remote installation, 24V/25W, 120V-277V, PWM Dimming

LED power supply source for remote installation, 24V/45W, 120V-277V, PWM Dimming

LED power supply source for remote installation, 24V/90W, 120V-277V, PWM Dimming

Electrical

Class 2, Remote 42V

Optional Accessories

Anodized aesthetical screen piece available in 3 different finishes:

  • Natural Anodized
  • Black Anodized
  • Gold Anodized
Notes

Recommended connections for in-ground installations with a 2-way terminal block 4- pole IP68 water stop on 24V side.

Painted versions are an exterior rated epoxy polyester powder coat finish for superior strength, heat and UV resistance.

During installation and maintenance avoid scratching or damaging the finish as it may result in premature corrosion of metal surfaces. Avoid cleaning fixtures with corrosive chemicals as it may result in voiding the warranty. pole IP68 water stop on 24V side. Order separately.

LED fixtures are highly susceptible to failure due to electrical effects from poor connections, and electrical short circuits. These are frequently caused by (a) overvoltage from primary voltage sources, (b) electrostatic discharge from the exterior environment. Ensure that all outdoor fixtures are installed on GFI circuits as required by code, and use proper surge protecting devices to avoid irreversible damages to electrical components.

All drivers should be installed in weather resistant enclosures (by others) or indoors. Silicon filled wire-nuts, should be used on all line-voltage connections to avoid syphoning moisture to electrical components.