The Landlord Ground is an IP67 luminaire family for ground recessed installation, powered by a 24V remote power supply. Body in anodized, then resin coated aluminum, external ring in shot-peened stainless steel, encasing the entire control electronics. The head available in 2 sizes, ø49 mm (1.9″), and ø64 mm (2.5″), with uplight or grazing emission (one, two, or four beams). Uplight emission versions are available with spot or medium optic, or with integrated non-removable honeycomb louver, for maximum visual comfort.
LED power supply source for remote installation, 24V/45W, 120V-277V, PWM Dimming
LED power supply source for remote installation, 24V/90W, 120V-277V, PWM Dimming
Input fixture voltage 24V
Control: Non Dimmable / Standard 0-10V dimming
Driver: Remote – Class 2
Input Driver Voltage: 120V-277V
Recommended connections for in-ground installations with a 2-way terminal block 4-pole IP68 water stop on 24V side. Order separately.
All drivers should be installed in weather resistant enclosures (by others) or indoors. Silicon filled wire-nuts where required, should be used on all line-voltage connections to avoid syphoning moisture to electrical components.
During installation and maintenance avoid scratching or damaging the finish as it may result in premature corrosion of metal surfaces. Avoid cleaning fixtures with corrosive chemicals as it may result in voiding the warranty.
LED fixtures are highly susceptible to failure due to electrical effects from poor connections, and electrical short circuits. These are frequently caused by (a) over-voltage from primary voltage sources, (b) electrostatic discharge from the exterior environment. Ensure that all outdoor fixtures are installed on GFI circuits as required by code, and use proper surge protecting devices to avoid irreversible damages to electrical components.