Landlord Spot

Landlord Spot 50 Wall

Designed by Piero Lissoni

Landlord Spot is a versatile round spotlight, providing direct light for the outdoors. Its multi-functional spotlight can be placed on the wall, ceiling, ground, or even tree branch with an exclusive strap. Ideal for outdoor lighting applications make trees, plants, or shrubbery stand out.

Landlord is the lord of the earth and the lord of light, and if you are a flower or a tree or a simple two or four-legged animal, you have to ask Landlord for permission if you want to pass unharmed through the night. – Piero Lissoni

Beam Angle
8º, 26º
3.4W (8º), 7.2 (26º)
Lumen Output
135lm to 492lm
Color Temperature
2700K, 3000K, 4000K
IP Rating
Power Supply

LED power supply source for remote installation, 24V/45W, 120V-277V, PWM Dimming

LED power supply source for remote installation, 24V/90W, 120V-277V, PWM Dimming


Input fixture voltage 24V

Control: Non Dimmable / Standard 0-10V dimming

Driver: Remote – Class 2

Input Driver Voltage: 120V-277V


Recommended connections for in-ground installations with a 2-way terminal block 4- pole IP68 water stop on 24V side. Order separately.

All drivers should be installed in weather resistant enclosures (by others) or indoors. Silicon filled wire-nuts where required, should be used on all line-voltage connections to avoid syphoning moisture to electrical components.

The painted versions are an exterior rated epoxy-polyester powder coat finish for superior strength, heat and UV resistance.

During installation and maintenance avoid scratching or damaging the finish as it may result in premature corrosion of metal surfaces. Avoid cleaning fixtures with corrosive chemicals as it may result in voiding the warranty.

LED fixtures are highly susceptible to failure due to electrical effects from poor connections, and electrical short circuits. These are frequently caused by (a) over- voltage from primary voltage sources, (b) electrostatic discharge from the exterior environment. Ensure that all outdoor fixtures are installed on GFI circuits as required by code, and use proper surge protection devices to avoid irreversible damages to electrical components.